Executing Effects - Sony BZDM-7020 User Manual

Executing Effects

Execution with the trackball and Z-ring
Execution with the RUN button
Returning to the initial key frame
You can execute the effect in the currently recalled register, using
the RUN button or trackball and Z-ring, to view the final effect.
To execute the effect, use the following procedure.
1
Select the active channels and the reference channel.
2
In the transformation operation section, press the RUN CTRL
button, turning it on.
3
Either turn the trackball horizontally or rotate the Z-ring
clockwise.
For one complete turn approximately 12 seconds of effect are
executed.
Use the following procedure to execute the effect automatically.
1
Select the active channels and the reference channel. If you
select more than one active channel, the execution position is
determined with respect to the reference channel.
2
Press the RUN button in the effect execution section.
• When the REVS button is lit, the effect is executed
backwards.
• When the STOP NEXT KF button is lit, the effect is
executed up to the next key frame.
• When the effect is stopped on the last key frame, execution
begins from the initial key frame.
During execution, pressing the RUN button again stops the
effect in progress. To restart the effect, press the RUN button
again.
To return to the initial key frame, press the REW button. Pressing
the REW button while the REVS button is lit moves to the last key
frame.
Chapter 7 Key Frame Effects
7-27