Sony BZDM-7020 User Manual page 282

Register Utilities
8-12
Chapter 8 Effect Utilities
4
Enter the number of the last register in the source block of
contiguous registers from the numeric keypad, and press the
ENTER button.
The indication in the prompt area reflects the register number
you have just entered. (For example: "FROM CH1 12–33")
To copy only the register specified in step 3
In step 4, without entering a register number, press the
ENTER button.
5
Press F2 (TO).
In the line below the "FROM" indication of the prompt area,
the legend "TO CHn" (where n is the current reference
channel number) appears. (For example: "TO CH1")
6
Using the buttons in the channel selection section, specify the
copy destination channel.
The "TO" indication in the prompt area changes to reflect the
channel number which you have just specified. (For example:
"TO CH2")
7
Enter the number of the first destination register from the
numeric keypad, and press the ENTER button.
The "TO" indication in the prompt area reflects the register
number you have just entered. (For example: "TO CH2 34")
8
Press F5 (EXEC).
The specified block of contiguous source registers is copied to
the block of contiguous destination registers beginning with
the register you specified in step 7.
During the copy operation, the prompt area shows the progress
and the number of the effect being copied.
To cancel the copy operation
Press F8 (CANCEL).