Sony BZDM-7020 User Manual page 211

Rotating the lighting pattern (for "BAR", or "PRESET"
for "SPLIT" or "MIRROR" only) – Position
When the pattern selection is "BAR" or, when it is "PRESET" for
"SPLIT" or "MIRROR" effects only, it is possible to rotate the
lighting pattern.
Align the line cursor with "Position", then adjust the following
parameter.
• Right knob ("Angl"): direction and angle through which you
wish to rotate pattern (–8 to +8).
Adjusting the position of the lighting pattern (for
"CIRCLE" only) – Position
When the pattern selection is "CIRCLE", it is possible to adjust
the position of the lighting pattern.
Align the line cursor with "Position", then adjust the following
parameters.
• Left knob ("X"): x-coordinate of the pattern center (–8 to +8).
• Center knob ("Y"): y-coordinate of the pattern center (–6 to +6).
Setting the lighting intensity – Intensity
Using the lighting effects, it is possible to adjust the lighting
intensity of the following three regions, depending on the pattern.
• "Light" region: the highlight region.
• "Ambient" region: the remainder of the uniformly illuminated
surface around the highlights.
• "Shade" region: the region in shade.
Shade portions
("Shade")
Highlights
("Light")
The three regions for which it is possible to adjust the lighting intensity
Normally lit
surfaces
("Ambient")
Chapter 5 Special Effects Operations
5-127