Front Key Settings - 52 - Sony BZDM-7020 User Manual

Video Signal and Key Signal Settings (When Not Using a Source
Selector) – 51 to 54
Front Key Settings – 52
Selecting the front key signal
6-6
Chapter 6 Input/Output Signal Operations
This menu selects the key signal for the front of the image, and
makes the other necessary settings.
In the IN/OUT menu, press F1 (FRONT KEY) to display the
FRONT KEY menu.
SIGNAL INPUT KEY
SOURCE
FRONT KEY menu soft key indications
The following is a typical operation carried out in this menu.
This process involves selecting the key signal for the front of the
image, and making the other necessary settings.
Use the following procedure.
1
Press F1 (SIGNAL), to select "Digital" or "Analog".
2
Press F2 (INPUT), to select "A" or "B".
These "A" and "B" signals correspond to the input connectors
on the rear panel of the processor.
3
Press F3 (KEY SOURCE), to select the key type from one of
the following.
Internal: Use the effective area defined using "CROP
settings" (page 5-18) as the key source.
External: Use an external signal as key source.
Luminance: Use the luminance signal of the input signal as
the key source.
Key Off: Force the key signal level to zero.
TBC SEPARATE
CENTER SIDE
KEY
INVERT