Sony BZDM-7020 User Manual page 106

Background and Edge Effects
5-22
Chapter 5 Special Effects Operations
TARGET: The drop shadow x- and y-axes are always defined
in the target space.
Notes
• If part of the image falls outside the monitor screen area, the
drop shadow of that part of the image is omitted.
• When using the combiner function (see page 5-74) to
combine images, it is not possible to apply a drop shadow
to the image from the uptstream channel.
DX
–DY
When shadow mode is set to
"AUTO" for an effect other than
an "overlap nonlinear effect" and
a "brick effect."
3D: The drop shadow is defined in a three-dimensional space.
Light source
Note
It is not possible to use this function at the same time as key
border, glow, brick, or nonlinear effects. If any of these
functions is selected, the effect is the same as when you select
TARGET.
DX
–DY
When shadow mode is set to
"TARGET," and when shadow
mode is set to "AUTO" for an
"overlap nonlinear effect" or a
"brick effect."