Executing Edits - Sony PDW-HR1 Operation Manual

Player timeline
Recorder timeline
Recorder timeline (editing results)

Executing edits

Before starting, insert a writable disc containing recorded
clips into this unit. If you will be using a two-unit system
with an external player, insert a tape or disc containing the
recorded material into the player.
See page 41 for information about connections in a two-
unit editing system.
1
In the clip playback screen, press the EDIT button.
The screen changes to the EDIT LIST screen.
2
Select Load Clip List in the Edit Menu, and then load
the editing target edit list by selecting it from the list
that appears.
If you continue editing without loading an edit list
here, then later (when you executed the AUTO EDIT
operation in step 10) save an editing result.
3
Select PLAYER SEL in the Edit Menu, and select the
media or device that contains the editing target
material by selecting one of the following.
• disc(clip)
• external (only in a two-unit editing system
configuration)
• disc(voice)
• SxS
4
Press the PLAYER button.
The screen changes to the PLAYER mode screen and
a list of the clips appears, showing the clips in the
media or device selected in step 3.
To select clips from a thumbnail list
You can select clips from a thumbnail list when you
have set PLAYER SEL in the Edit Menu to
"disc(clip)" or "disc(voice)".
In point Out point
In point
Switch to thumbnail display by pressing the
THUMBNAIL button, and then select a clip. Next,
press the PUSH SET knob or the SET button to return
to the viewer display.
5
Use the PLAY, PAUSE, and STOP buttons and the
shuttle/jog dial to play the clip, and set edit points in
the clip.
To enlarge or reduce the scale of the timeline
Press the + TRIM or – TRIM button.
To set In or Out points
With the IN or OUT button held down, press the
ENTRY button.
To jump to In or Out points
With the IN or OUT button held down, press the
GOTO button.
To adjust the positions of In or Out points
With the IN or OUT button held down, press the
– TRIM or + TRIM button.
To delete In or Out points
With the IN or OUT button held down, press the
DELETE button.
To recall a deleted In point or Out point
Press the RECALL button with the IN button or OUT
button held down.
6
Press the RECORDER button.
The screen changes to the RECORDER mode screen,
and sub clips in the edit list that was loaded in step 2
appear.
When there are no sub clips
Sub clips are not displayed when a new edit list is
loaded and when no edit list is loaded.
Out point
109
Editing Operations