Step 3: Initial Settings; Video Signal Format Settings; Date And Time Settings - Sony AWS-750 Operating Instructions Manual

Step 3: Initial Settings

Specify the video signal format that will be handled by
the unit and the date and time. If necessary, you can also
adjust the brightness of the display.
If you have already configured these settings, proceed to
"Step 4: Video Switching" (page 28).

Video Signal Format Settings

Specify the video signal format handled by the unit (i.e.,
system format) when necessary.
The default setting is [1080 60i].
Tip
The [60i] setting is actually equivalent to "59.94i."
Configuration is performed in the sub screen.
1
Tap at the top right of the sub screen.
The [System Setup] screen appears.
2
Tap [Video].
The [Video Setup] screen appears.
26
Step 3: Initial Settings
3
Tap [System] in the menu to the left.
The [System] screen appears.
4
Select the system format in the [System Format]
drop-down list.
A confirmation message for restarting the unit
appears.
5
Tap [Shutdown].
The unit shuts down.
6
Press the 1 switch on the left side of the unit to turn
on the unit.
Changes to the system format will be applied after the
unit restarts.

Date and Time Settings

Configure the unit's internal clock.
This setting is used for the following.
• Clock display in the main screen
• File creation and file update date and time
• System timecode