Display Pim Bsr-Info - 3Com 8807 Command Reference Manual

display pim bsr-info

send: Debugging information of PIM-SM sending packets.
assert | bootstrap | crpadv | jp | reg | regstop: Packets type.
Description
Use the debugging pim sm command to enable PIM-SM debugging functions.
Use the undo debugging pim sm command to disable the debugging functions.
By default, PIM-SM debugging functions are disabled.
Example
# Enable all PIM-SM debugging functions
<SW8800> debugging pim sm all
Syntax
display pim bsr-info
View
Any view
Parameter
None
Description
Use the display pim bsr command to view the BSR information.
Related command: c-bsr, c-rp.
Example
<SW8800> display pim bsr-info
Current BSR Address: 192.168.1.1
Priority: 0
Mask Length: 30
Expires: 00:01:26
Bootstrap-Period: 60 seconds
Bootstrap-Timeout: 130 seconds
Local host is BSR
Table 87 Description on the fields of the display pim bsr command
Field
BSR
Priority
Mask Length: 30
Expires: 00:01:55
BootStrap-Period: 60 seconds Boot strap interval
Bootstrap-timeout: 130
second
PIM Configuration Commands
Description
Boot strap router
Priority of BSR
Length of mask
Expire time
Boot strap timeout
623