Programming; Introduction - CareFusion Alaris 8015 User Manual

The Alaris System can be programmed with Guardrails Suite
MX Protection or with no Guardrails Suite MX protection:
• Guardrails Suite MX Protection
• Manual Programming (see page 2-24)
• Programming with Interoperability (see page 2-58)
• Auto-ID (Refer to Section "Auto-ID")
• No Guardrails Suite MX Protection
• Manual Programming Basic Infusion
• Manual Programming Basic Infusion with Drug
Calculation
References throughout this procedure to specific drugs and
drug doses are for illustration purposes only. Refer to specific
drug product labeling for information concerning appropriate
administration techniques and dosages.
See "General Information," "Features and Displays" and the
PC unit section of this User Manual for information about:
• Displays
• Operating Features, Controls, Indicators
The majority of user interface programming is identical for both
the Pump module and Syringe module. When referring to both
modules, the term "infusion modules" is used. The modules are
referred to singularly as the Pump module and the Syringe
module.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015

Introduction

Programming

Programming
2-23