Warnings And Cautions - CareFusion Alaris 8015 User Manual

Alaris system with guardrails suite mx
Hide thumbs Also See for Alaris 8015:
Table of Contents

Advertisement

WARNINGS
if used in the presence of flammable
Explosion risk
anesthetic agents or gasses.
Assess patient's condition before silencing an alarm. Do
not silence alarm if patient safety might be compromised.
Before each use, verify that the alarm limits are
appropriate for the patient.
The Alaris System performs a self check during power
up. The PC unit should beep, no errors should occur, and if
a module is connected, all LED segments should flash. If
the Alaris System fails the self check, remove the failing
PC unit or module from use.
When properly secured/snapped, the release latch
provides a very secure connection between modules. If not
properly latched, a module can be dislodged during
operation.
Disconnect from main (AC) and battery power when
performing maintenance.
Use only CareFusion batteries. The use of third party
batteries could affect the safety and efficacy of Alaris
products.
The battery cannot be repaired and should not be opened.
The battery is intended as a backup system. Leave the
power cord connected to a hospital grade AC power source
whenever available.
Battery replacement should be performed by qualified
service personnel while the instrument is not in use.
PC Unit Section
Alaris System User Manual – with v9.33 Model 8015

Warnings and Cautions

General
General Information
General Information
1-33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF