Secondary Infusion; Infusion - CareFusion Alaris 8015 User Manual

Manual Programming—NO Guardrails Suite MX Protection (Continued)
See Manual Programming—Secondary Infusion (Pump
Module) on page 2-51 for a description of the secondary
infusion mode and for setup instructions.
The following procedure should be used only when:
• drug to be infused is not listed in Drug Library,
• primary infusion is running, and
• a check valve administration set is being used.
To program a primary infusion, see Manual Programming—
Primary Infusion on page 2-24. To program a basic infusion,
see Basic Infusion without Drug Calculation on page 2-88.
1. Press
SECONDARY
Programming—NO Guardrails Suite MX Protection
2-94

Secondary Infusion

Infusion

soft key and then soft key.
BASIC SEC
Alaris System User Manual – with v9.33 Model 8015
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Pump and Syringe Modules Section