CareFusion Alaris 8015 User Manual page 293

Specifications and Symbols (Continued)
Specifications (Continued)
Flow Rate Programming:
Fluid Ingress Protection:
Loading Dose Range:
Maximum Dose Range:
Occlusion Alarm Thresholds:
Operating Principle:
PCA Dose Range:
Rate Accuracy:
Shock Protection:
PCA Module Section
Alaris System User Manual – with v9.33 Model 8015
Flow rate range is from
Flow Rates (mL/h)
0.10 - 9.99
10 - 99.9
100 - 999
Rate Restriction by Syringe Size:
Syringe Size (mL)
20
30/35
50/60
IPX1, Drip Proof
Configured according to hospital best-practice guidelines.
Configured according to hospital best-practice guidelines.
Three settings:
Low
Medium
High
Positive displacement
Configured according to hospital best-practice guidelines.
±2% of full scale plunger travel (not including syringe variation)
WARNING
Syringe size and running force, variations of back pressure, or any
combination of these can affect rate accuracy. Factors that can
influence back pressure are: Administration set configuration, IV
solution viscosity, and IV solution temperature. Back pressure can also
be affected by type of catheter. See "Trumpet and Start-Up Curves" for
data on how these factors influence rate accuracy.
Type CF, Defibrillator Proof patient applied part. (PCA module)
Type BF, Defibrillator Proof patient applied part. (Dose Request Cord)
to mL/h and can be selected as follows:
0.1 999
Selectable Increments (mL/h)
0.01
0.1
1.0
Flow Rate Range (mL/h)
0.1 - 500
0.1 - 650
0.1 - 999
General Information
3-59