While Infusion Is In Progress - CareFusion Alaris 8015 User Manual

New Patient (Continued)
6. To scan barcode on patient identification band, press
scan trigger on handheld scanner.
• If scan is successful, an audible tone sounds and
patient ID appears on Main Display.
• If Profile is configured in Authorized User Mode,
PANEL LOCKED
• When a questionable barcode is scanned at main
screen and panel is unlocked, a prompt to confirm type
of barcode scanned appears. This occurs whether
Authorized User Mode is enabled or disabled.
To unlock panel, clinician's ID must be scanned.
NOTES:
Automatic display of

enabled in the System Configuration settings.
If the patient ID is not entered at this time, it can still be

entered later.
Patient ID can be entered manually using the PC unit keypad

(see PC unit section of this User Manual).
NOTE:
There is a prompt to accept or decline the change of patient ID if it
is different from the patient ID already associated to the PC unit.

While Infusion is in Progress

To associate the PC unit with a patient ID when patient ID
screen is not shown:
1. Attach handheld scanner to connection port on Auto-ID
module. Ensure a secure circuit connection.
The green READY indicator illuminates, indicating the
system is ready to scan.
Programming
6-4
Patient Identification (Continued)

screen appears.
Patient ID Entry
screen should be
CAUTION
•
CLASS 1 LED PRODUCT
stare into the beam or allow beam
to strike patient's face.
• Always verify that information
displayed on the PC unit matches
scanned data.
1st Generation Scanner
2nd Generation Scanner
Alaris System User Manual – with v9.33 Model 8015
: Do not
Scan
Scan Trigger
Auto-ID Module Section