Change Pulse Beep Volume (Continued)
2.
To test or change:
a. To test volume level (when not attached to patient),
press Test soft key.
Pulse beep must be on to test volume level. To turn
pulse beep on, press Louder soft key and adjust as
needed.
b. To increase volume, press Louder soft key until
desired volume level is attained (
c. To decrease volume, press Softer soft key until
desired volume level is attained.
d. To turn off pulse beep, press Off soft key.
3.
To return to
SPO2 Main
Change SatSeconds Limit
1.
Press SatSeconds Setup soft key.
2.
To change SatSeconds™, press applicable soft key.
Selectable Increase and Decrease options are
seconds.
and 100
3.
To return
SPO2 Main
SpO
Module Section
2
Alaris System User Manual – with v9.33 Model 8015
Channel Options (Continued)
,
, or
1
2
display, press
CONFIRM
display, press
CONFIRM
).
3
soft key.
(8210)
,
,
10
25
50,
soft key.
A A
A
A
Test
Pulse Beep Volume
Off
1
1
Softer
Louder
>Press CONFIRM
CONFIRM
A A
SatSeconds Setup
Increase
SPO2
10
Seconds
Decrease
Off
>Press CONFIRM
CONFIRM
Programming
4-9