Nellcor Patient Cables and Sensors
The Nellcor patient cables interface the SpO
patient sensors.
When selecting a sensor, consider the patient's weight, the
adequacy of perfusion, the available sensor sites, and the
duration of monitoring. Use only Nellcor sensors. Select
an appropriate sensor, apply it as directed, and observe
all warnings and cautions presented in the User Manual
accompanying the sensor.
For a list of compatible sensors and cables, refer to the Monitor
Sensor Compatibility Alaris
Masimo Patient Cables and Sensors
When selecting a sensor, consider the patient's weight, the
adequacy of perfusion, the available sensor sites, and the
duration of monitoring. Use only Masimo SET sensors. Select
an appropriate sensor, apply it as directed, and observe all
warnings and cautions presented in the User Manual
accompanying the sensor.
For a list of compatible sensors and cables, refer to the Monitor
Sensor Compatibility Alaris
SpO
Module Section
2
Alaris System User Manual – with v9.33 Model 8015
Cables and Sensors
module with the
2
TM
SpO
Module 8210 Series.
2
TM
SpO
Module 8220 Series.
2
(8210)
(8220)
General Information
4-17