CareFusion Alaris 8015 User Manual page 105

Manual Programming—Primary Infusion (Continued)
Bolus Dose (Continued)
Restore Bolus Dose (Continued)
c. Press
RESTORE
d. Verify dosing parameters and press
2. Bolus Dose completed - module turned off:
a. Press
CHANNEL SELECT
b. Press
RESTORE
c. Verify parameters and press
d. Verify infusion parameters and press
e. Press
RESTORE
f. Verify dosing parameters and press
NOTES:
If the Bolus Dose feature is enabled, the BOLUS soft key

appears in the Continuous Infusion screen and becomes
active when a VTBI is entered.
The bolus VTBI cannot exceed the programmed Continuous

Infusion VTBI.
Programming and starting a Bolus Dose deletes any

programmed delay.
If no continuous rate is entered or if the Bolus Dose VTBI

equals the Continuous Infusion VTBI, the infusion ends when
the bolus has been delivered. No KVO infusion follows.
To see details during the bolus infusion, press the CHANNEL

SELECT key.
The Pump module keypad is used in the illustration but the key

is the same for the Syringe module.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015
soft key.
START
key.
soft key.
soft key.
NEXT
BOLUS
soft key.
START
soft key.
soft key.
soft key.
Manual Programming with Guardrails Suite MX
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
2-39