The following procedure can be performed only when the
Guardrails Suite MX is not enabled (Profile option not being
used for programming).
1.
Press Limit Mode soft key.
2.
To change Limit Mode Setup, press applicable soft key.
OR
To leave Limit Mode Setup unchanged and return to
display, press
SPO2 Main
Change Pulse Beep Volume
1.
Press Pulse Beep Volume soft key.
Programming
4-8
Channel Options
Change Limit Mode
soft key.
EXIT
Alaris System User Manual – with v9.33 Model 8015
A A
Limit Mode Setup
Adult
Neonatal
>Select an Option or
EXIT
EXIT
SpO
Module Section
2