CareFusion Alaris 8015 User Manual page 67

This section of the User Manual provides Pump module (Model
8100) and Syringe module (Model 8110) instructions and
information. It is used in conjunction with:
• Alaris™ product administration set instructions
• Drug product labeling
• PC unit section of this User Manual
TM
• Alaris Pump Module Set Compatibility Card
• Alaris TM Syringe Module Set Compatibility Card
• Pump Module Technical Service Manual
• Syringe Module Technical Service Manual
• System Maintenance software (and its instructions) for Alaris
System check-in, maintenance, and wireless configuration
Essential Performance
The Alaris infusion modules are designed to accurately deliver
the programmed amount of the medication or fluid over the
programmed time period. The Alaris infusion modules ensure
that an infusion is not being inadvertently delivered when the
user expects the system to be in a paused, stopped, or off
condition. The Alaris infusion modules employ measurement
systems to detect and alarm for conditions adverse to safe
administration of fluid. These include measurements of proper
infusion set loading (free flow detection), pressure (occlusion
detection), and air-in-line detection.
The EtC0 module will monitor and alarm when a patient
2
physiological condition is out of range.
The Sp0 module will monitor and alarm when a patient
2
physiological condition is out of range.
The Pump and Syringe modules are intended for facilities that
utilize infusion and/or syringe pumps for the delivery of fluids,
medications, blood, and blood products using continuous or
intermittent delivery through clinically acceptable routes of
administration; such as, intravenous (IV), intra-arterial (IA),
subcutaneous, epidural, enteral, or irrigation of fluid spaces.
The Pump and Syringe modules are indicated for use on
adults, pediatrics, and neonates. Up to four Pump and/or
Syringe modules can be connected to the Alaris System.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015
Introduction
Getting Started
WARNING
, for both the
Read all instructions
infusion modules and PC unit, before
using the Alaris System.
Getting Started
2-1