Add Module While System Is Powered On - CareFusion Alaris 8015 User Manual

Attach and Detach Module (Continued)

Add Module While System is Powered On

Add module as described in "Attach Module."
• System tests module, causing all LED segments and
indicator lights of displays to illuminate briefly.
• Appropriate module identification display (A, B, C, or D)
illuminates. Modules are always labeled left to right, so if
a module is added to left of other modules, all modules are
reidentified. Module re-identification does NOT interrupt or
affect infusion or monitoring on active modules.
• Module positions (A, B, C, or D) appear on Main Display.
• If any of the following conditions are observed, affected
module must be removed from use and inspected by
qualified personnel:
◦ LED segments are not illuminated on displays during
power-on test.
◦ Indicator lights do not illuminate.
◦ Appropriate module identification does not appear.
PC Unit Section
Alaris System User Manual – with v9.33 Model 8015
General Setup and Operation
1-5