CareFusion Alaris 8015 User Manual page 423

Alaris System (Continued)
Procedure (Continued)
NOTE:
Use the recommended healthcare-grade solutions and DO NOT
use chemicals that can damage the surfaces of the instrument.
Cleaning the Case
1. Make sure the instrument is turned off, unplug the power
cord and wipe all of the exposed device surfaces EXCEPT
the inter-unit interface (IUI) connectors.
DO NOT use an oversaturated cloth. Be sure to squeeze
out excess liquid.
2. Use a dedicated soft-bristled brush to clean the case to
remove any visible residue. The brush may also be used to
clean narrow or hard-to-reach areas.
DO NOT use any hard, abrasive or pointed objects to clean
any part of the instrument.
Appendix Section
Alaris System User Manual – with v9.33 Model 8015
Cleaning (Continued)
CAUTION
• The use of chemicals that can
damage the surface of the
instrument and failure to follow
the Alaris product cleaning
procedures and the cleaning
solution manufacturer's
recommended dilutions can result
in an instrument malfunction
or product damage, such as
weakening and cracking of
the case, and could void the
warranty.
• Do not allow the cleaning solution
to contact the IUI connector
when cleaning the instrument.
• Do not use hard, abrasive or
pointed objects to clean any
part of the instrument.
CAUTION
• Do not allow cleaning solutions
to collect on the instrument.
Residue buildup might cause
the moving parts to become
sticky and hinder their operation
over time.
• Certain chemicals can damage
the surfaces of the instrument.
Refer to the following website for
a list of chemicals that should
NOT be used:
www.carefusion.com/alarissystemcleaning
• Do not use chemicals that can
damage the surface of the
instrument. When possible use
cleaning products that are
recommended for use by
CareFusion.
A-29