Data Set Status - CareFusion Alaris 8015 User Manual

Wireless Connection (Continued)
4. Wireless connection can be disabled or enabled:
• To disable wireless communication, press Disable
soft key.
◦ If wireless connection is disabled, it remains
disabled until PC unit is powered off. Setting
defaults to Enable when PC unit is powered back
on.
◦ v10.33 or later System Maintenance software
instructions also includes a procedure on how to
disable a wireless RF card on a PC unit being used
in a non-wireless environment. Wireless
connection remains disabled until System
Maintenance software is used to enable it.
• To enable wireless connection, press Enable soft key.
Pre-v9.5 PC unit: View Network Status after
pressing Enable soft key. If a Status of
identified, System Maintenance software was used to
disable wireless connection. Use v9.5 or later System
Maintenance software to enable wireless connection.
1. Press
OPTIONS
2. Press
PAGE DOWN
3. To view Data Set status, press Data Set Status soft key.
General Setup and Operation
1-30
System Options (Continued)

Data Set Status

key.
soft key two times.
is
DISABLED
Alaris System User Manual – with v9.33 Model 8015
System Options
Wireless Enable
Connection
Disable
>Press ENABLE or
DISABLE
System Options 3 of 3
Network Status
Wireless Connection
Data Set Status
Maintenance Due Yes
>Select an Option or
EXIT
EXIT
PAGE UP
PC Unit Section