CareFusion Alaris 8015 User Manual page 151

Programming with Interoperability—Secondary Infusion (Pump Module)
Change Primary Infusion Parameter
1. Press
CHANNEL SELECT
2. Press soft key.
SET UP
3. Press
PRIMARY
4. To change primary infusion parameter, press applicable
soft key ( or
RATE
5. Verify correct primary infusion parameters and press
soft key.
SECONDARY
Secondary setup screen is displayed.
6. Press soft key.
NEXT
7. To resume secondary infusion, press
8. Verify that drops are flowing from the secondary container
drip chamber.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015
(Continued)
key.
soft key.
) and use numeric data entry keys.
VTBI
soft key.
START
Programming with Interoperability and Guardrails Suite MX
2-85