Select New Patient and Profile Options (Continued)
3.
To select a Profile, press corresponding left soft key.
To view additional choices, press
4.
To confirm Profile selection, press
Main screen appears.
Patient ID Entry Feature
The option to enter and display a 16-character alphanumeric
patient identifier is always available. The instrument can be
configured to automatically display the Patient ID Entry
screen during start-up or to provide access only through the
Systems Options menu (see "System Options").
If Yes was selected to indicate programming for a new patient,
perform one of following steps:
•
If patient identifier is not required, press
soft key.
•
To manually enter patient identifier, use numeric data entry
keys and/or alpha speed keys.
◦
An alphanumeric identifier, of up to 16 characters, can
be entered.
◦
Press soft key next to a letter group to list letters in
that group. Press soft key next to an individual letter to
enter that letter.
◦
To access letter "Z" and special characters (hyphen,
underscore, space), press
◦
To clear an entire entry, press
◦
To back up a single character at a time, press
key.
•
To scan barcode on patient identification band,
see"Alaris Auto-ID Module Model 8600", section 6 of this
User Manual.
PC Unit Section
Alaris System User Manual – with v9.33 Model 8015
Start-Up (Continued)
PAGE DOWN
soft key.
CONFIRM
CONFIRM
soft key.
PAGE DOWN
key.
CLEAR
soft key.
or
EXIT
CANCEL
Midtown Hospital
1 of 2
Profiles
Adult ICU
Adult General Care
Neonatal
Peds ICU
Neonatal ICU
>Press CONFIRM
PAGE
CONFIRM
DOWN
Patient ID Entry
A-E
A
B
F-J
K-O
C
D
P-T
U-Y
E
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>Enter Patient ID and Press
CONFIRM
PAGE
EXIT
CONFIRM
DOWN
General Setup and Operation
1-9