Set Up Pca Dose And Continuous Infusion - CareFusion Alaris 8015 User Manual

Set Up Continuous Infusion Only (Continued)
Drug Amount
Diluent Volume
OR
Drug Amount
Diluent Volume
• If a Soft Limit is overridden, G icon is displayed. When
G soft key is pressed, all applicable out-of-range limits
are listed.
7. Close and lock security door.
8. Verify correct programming parameters and press
soft key.
• Green Infusing Status Indicator illuminates.
• Infusion mode and drug name scroll in Channel
Message Display. If a loading dose has been entered,
DELIVERING LOAD
• Volume infused in mL/h is displayed in Rate Display.
• Main Display alternates between volume remaining
and infusion mode with drug name.

Set Up PCA Dose and Continuous Infusion

1. Perform steps in "Prepare Infusion."
2. Press
PCA DOSE + CONTINUOUS
Mode screen.
PCA Module Section
Alaris System User Manual – with v9.33 Model 8015
Infusion Modes (Continued)
1 mg
1 mL
30 mg
30 mL
scrolls
.
soft key from Infusion
START
A Second Nurse Summary
Morphine
2
Cont. Dose:
mg/h
30
Max Limit:
mg/4 h
Loading
1
mg
Dose:
[Conc]: 1 mg/mL
>Press START
PRO-
PAUSE START
GRAM
A
Guardrails Drug Setup
Morphine
INFUSION MODES
PCA Dose only
Continuous Infusion
PCA
Dose + Continuous
Loading Dose Only
>Select an Option
DRUG
SETUP
LIBRARY
Programming
3-17