Detach Module - CareFusion Alaris 8015 User Manual

Attach and Detach Module (Continued)
Attach Module (Continued)
2. Rotate free module down against PC unit or attached
module until release latch snaps in place.
1. Ensure that module is powered off before detaching.
2. Push module release latch and then rotate module up
and away from PC unit or attached module (opposite to
motion shown in "Attach Module" procedure) to disengage
connectors.
• Alaris System reidentifies and shows appropriate
module identification (A, B, C, or D), from left to right.
• Appropriate module position(s) (A, B, or C) for
remaining module(s) appear on Main Display.
General Setup and Operation
1-4

Detach Module

WARNING
When properly secured/snapped, the
release latch
connection between modules. If not
properly latched, a module can be
dislodged during operation.
WARNING
Failure to perform these operations
can result in improper instrument
operations.
WARNING
Failure to follow these instructions
may result in potential hazards
associated with damaged IUI
connectors.
Alaris System User Manual – with v9.33 Model 8015
provides a very secure
Release Latch
PC Unit Section