CareFusion Alaris 8015 User Manual page 402

Definitions (continued)
Terms
Maintenance Reminder
Medium Priority Alarm
NEOI Snooze (Reminder signal)
Monitoring Alarm
Presilence
Prompt
Technical Alarm
All Alaris System Alerts are prioritized by type/source and the
condition of the alert.
ALERT Priority
HIGH Priority
MEDIUM Priority
LOW Priority
INFORMATIONAL
Reminder Signal
Troubleshooting and Maintenance
A-8
Alarms and Alerts (continued)
A visual message that when enabled appears at startup when a scheduled preventive
maintenance is due/overdue for component of Alaris System (PC unit or attached module).
A medium-priority alarm is initiated by any alarm condition requiring a prompt user response.
Configurable alert, if enabled, provides an audio only tone when a Near End of Infusion alarm
had been previously silenced.
An alarm arising from a monitoring module (SpO2 or EtCO2).
Allows the user to silence a monitoring module for 2 minutes. Also known as Audio Pause, the
duration of Presilence (Audio Pause) is not configurable..
An audio signal and/or a visual message appearing on bottom line of Main Display or in
Message Display. Audio signal can be silenced for 12 seconds pressing the SILENCE key.
An alarm arising from a hardware or software failure condition.
Alert Prioritization
ALERT Type/Source
Technical Software Fatal
Uncontrolled Infusion
Technical Malfunction
Monitoring
Infusion/PC unit
Monitoring
Infusion/PC unit
Infusion/PC unit
Informational
Reminder Signal
Definitions
Color Theme Silenceable
N/A NO
Flashing Red NO
Flashing Red YES
Flashing Red YES
Flashing Red YES
Flashing Yellow YES
Flashing Yellow YES
Steady Yellow YES
N/A N/A
N/A NO
Alaris System User Manual – with v9.33 Model 8015
Appendix Section