CareFusion Alaris 8015 User Manual page 243

1. Press
OPTIONS
2. Press Prime Set with Syringe soft key.
3. Press and hold
of syringe administration set is complete.
• Volume used during priming is displayed but is not
added to
VTBI
• Fluid is delivered during priming only while
key is pressed. Each press of
up to 2 mL at the maximum rate of the selected
syringe. (see Rate Restriction by Syringe Size: on
page 3-59) of priming/fluid per continuous press. To
deliver additional amounts, press
again.
4. When priming is complete, release
5. To return to main screen, press
Guardrails Drug Setup screen is displayed.
6. Select infusion mode
PCA Module Section
Alaris System User Manual – with v9.33 Model 8015
Prepare Infusion (Continued)
Prime (Continued)
key.
soft key until fluid flows and priming
PRIME
.
PRIME
PRIME
EXIT
.
soft
PRIME
soft key delivers
soft key
PRIME
soft key.
soft key.
SILENCE
OPTIONS
1 2 3
4
5 6
7 8 9
ENTER
0
CLEAR CANCEL
A
Channel Options 2 of 2
Pressure Limit - High
Prime Set with Syringe
>Select an Option or
EXIT
PAGE
EXIT
UP
A
Prime Set with Syringe
CAUTION: Do
not prime with
disposable set
connected to
patient!
Prime Volume
0
mL
>Press and Hold PRIME
EXIT
PRIME
Programming
SYSTEM
ON
3-9