Bolus Dose - CareFusion Alaris 8015 User Manual

Manual Programming—NO Guardrails Suite MX Protection (Continued)
Basic Infusion with Drug Calculation (Continued)
16. Syringe module:
• Unclamp tubing and attach administration set to
patient.
FU
• Unclamping tubing and starting infusion before
RATE (mL/h)
attaching administration set to patient minimizes
SELECT CHANNEL
PAUSE
CHANNEL
OFF
RESTART
any potential bolus that can be released from
pressure built up in set due to normal syringe
loading and priming.
NOTE:
Do not enter a patient weight if weight is not used in the
calculation.
1. Set up infusion as described in "Continuous Infusion -
Drug Calculation" procedure, but do not start infusion.
2. Press soft key.
BOLUS
3. To enter Bolus Dose, use numeric data entry keys.
• After a Bolus Dose and weight (if used) are entered,
bolus VTBI and concentration [conc] alternate in Main
Display.
4. Press soft key next to appropriate unit of measure for
dose.
If mcg or mg is selected as dosing unit, a
entry cannot be made. If mcg/kg or mg/kg
WEIGHT
is selected as dosing unit, a
required.
5. To enter bolus duration, use numeric data entry keys.
alternates with
TOTAL DOSE
Programming—NO Guardrails Suite MX Protection
2-92

Bolus Dose

PATIENT WEIGHT
rate.
INFUSE AT
PATIENT
entry is
Alaris System User Manual – with v9.33 Model 8015
FU
FU
RATE (mL/h)
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
A A A
Drug Calculation
BOLUS DOSE
_ 2000
DOSE
PATIENT
WEIGHT
DURATION
[Conc]: 5000 mcg/mL
>Select the Desired Dosing
Units
CONT-
SETUP
INUOUS
Pump and Syringe Modules Section