CareFusion Alaris 8015 User Manual page 127

Programming with Interoperability and Guardrails Suite MX (Continued)
NOTE:
If the infusion order does not specify whether the infusion is to be
pre-populated as a primary or secondary infusion, the Alaris
System will determine whether to pre-populate the infusion as
primary or secondary based on the state of the intended Module
and on the Guardrails Drug Library configuration. For example:
The infusion order will be pre-populated as a primary infusion on
an idle Pump module if the configuration of the drug/fluid entry in
the active Guardrails Profile supports it. The infusion order will be
pre-populated as a secondary infusion on a Pump module that is
programmed for or infusing a primary fluid if the configurations of
both the primary and secondary entries in the active Guardrails
Profile support it.
NOTE:
All fields that are editable with manual programming are editable
when pre-populated with interoperability.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015
Programming with Interoperability and Guardrails Suite MX
2-61