Features And Displays; Features And Definitions - CareFusion Alaris 8015 User Manual

Features and Definitions

See the PC unit section of this User Manual for system features and definitions.
Feature
Anesthesia Mode
Bolus Dose
Callback
Channel Labels
Concentration
Limits
Delay Options
Dose Checking
Drug Calculation
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015

Features and Displays

Definition—Pump and Syringe Modules
When operating in Anesthesia Mode, a module can be paused indefinitely
without an alarm. Anesthesia Mode also makes it possible to have additional
drugs in each Profile, which are only accessible when operating in that mode.
Allows a bolus infusion to be programmed using either Drug Library or drug
calculation feature. It can be programmed with or without a Continuous Infusion
following a bolus.
A callback for a programmed delay (see "Delay Options" definition) can be
scheduled to give an alert
is completed,
Before and After
Available when Profiles feature is enabled. It provides a hospital-defined list of
labels, displayed in Channel (module) Message Display, and identifies module
with catheter location or other helpful information.
Limits specified for range of concentrations allowed for a particular drug in a
Profile.
Allows system to be programmed to delay start of an infusion
120 minutes or for a specific time up to 23 hours 59 minutes.
b)
Always Dose Checking option causes an Alert to occur each time a dose limit is
exceeded. Drug label in Message Display provides an indicator ("
that dose is beyond current Soft Limit.
Smart Dose Checking option causes an initial soft Alert to occur when a dose
limit is exceeded. Subsequent programming beyond dose limit does not receive
an Alert. Drug label in Message Display provides an indicator ("
that dose is beyond current Soft Limit.
Allows:
• entry of drug dose for a Continuous Infusion (Alaris System calculates
correct flow rate to achieve desired dose),
OR
• entry of flow rate for a Continuous Infusion (Alaris System calculates
corresponding drug dose).
an infusion is to be initiated,
Before
an infusion, or no alert (
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
an infusion
After
).
None
for up to
a)
" or "
 LLL
" or " ")
 LLL
General Information
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
")
2-137