Patient Identification; New Patient - CareFusion Alaris 8015 User Manual

Associating the PC unit with a patient provides a means of
identifying the module(s) that will deliver IV medications to that
particular patient.
To associate the PC unit with a new patient ID:
1. Attach handheld scanner to connection port on Auto-ID
module. Ensure a secure circuit connection.
2. Power on PC unit.
3. To select New Patient?, press Yes soft key.
4. To accept current Profile, press Yes soft key.
OR
To proceed to Profile selection screen, press No soft key.
5. To accept Profile selection, press
• Patient ID Entry screen appears.
• Green
READY
is ready to scan.
Auto-ID Module Section
Alaris System User Manual – with v9.33 Model 8015

Patient Identification

New Patient

CONFIRM

indicator illuminates, indicating system
WARNING
Use only the handheld external
scanner supplied by CareFusion.
Using other accessories can result in
increased emissions or decreased
immunity of the Alaris System.
soft key.
Ready-to-scan
indicator
Programming
READY
SCAN
CANCEL
Programming
6-3