Attach And Detach Dose Request Cord - CareFusion Alaris 8015 User Manual

The Dose Request Cord must be attached to the PCA module
when delivering a
PCA
To attach Dose Request Cord:
Insert latching connector into Dose Request Cord
attachment. Red marking on latching connector should
be aligned with red marking on Dose Request Cord
receptacle.
To detach Dose Request Cord:
Hold body of latching connector and pull straight out,
without twisting or turning, from Dose Request Cord
receptacle.
Getting Started
3-2

Attach and Detach Dose Request Cord

dose or + continuous dose infusion.
PCA
WARNING
Carefully locate the Dose Request
Cord to reduce the possibility of
patient entanglement or
strangulation.
Red alignment marks
Latching Connector
Alaris System User Manual – with v9.33 Model 8015
Dose Request
Cord receptacle
PCA Module Section