Compatible Syringes (Syringe Module) - CareFusion Alaris 8015 User Manual

Administration Set/Syringe Information (Continued)

Compatible Syringes (Syringe Module)

The Syringe module is calibrated and labeled for use with
the following single-use disposable luer-lock syringes. Use only
the syringe size and type specified on the Main Display. The
full list of permitted syringe models is dependent on the
software version of the Syringe module.
Compatible syringe availability and model numbers vary from
country to country. The syringes listed in the table below may
not be available in all countries, including the US and Canada.
See the Alaris Syringe module compatible syringes and flow
rate ranges specification for the country-specific syringe model
numbers supported.
Manufacturer 1 mL
x
BD Plastipak
IVAC
Monoject
Terumo
NOTES:
The Monoject SoftPack Luer-Lock Syringe (blister pack) is the

only currently supported Monoject 3 mL.
The Terumo 5 mL can also be used as a 6 mL, the 10 mL as a

12 mL, and the 30 mL as a 35 mL.
General Information
2-136
3 mL 5 mL 6 mL
x x
x x

x
x 
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
When using a
syringe, CareFusion strongly
recommends using an extension set
with a pressure disc, for improved
pressure monitoring and shorter
times to occlusion alarm.
10 mL 12 mL 20 mL
x x
x x
x
 x
Alaris System User Manual – with v9.33 Model 8015
CAUTION
mL or smaller
10
30 mL 35 mL
x
x
x

Pump and Syringe Modules Section
50 mL 60 mL
x
x
x
x