Stop Infusion - CareFusion Alaris 8015 User Manual

Change Syringe and Restore Infusion (Continued)
3. Verify restored drug/concentration. Press
4. Prime administration set (see "Prepare Infusion," "Prime").
5. For restored parameters, verify valid parameters and press
soft key.
CONFIRM
To change a restored parameter:
a. Press applicable soft key.
b. Enter desired parameter using numeric data entry
keys.
c.
Press CONFIRM soft key.
6. Close and lock security door.
7. Verify correct programming parameters on summary
screen and press
Press and hold
CHANNEL OFF
approximately 1.5 seconds. If no other channel is active, the
system powers down when the
PCA Module Section
Alaris System User Manual – with v9.33 Model 8015
Infusion Modes (Continued)
soft key.
START

Stop Infusion

key until a beep is heard,
CHANNEL OFF
soft key.
NEXT
key is released.
A
Second Nurse Summary
Morphine
2
mg
PCA Dose:
Lockout
10
minutes
Interval:
25
Max Limit:
mg/4 h
[Conc]: 1 mg/mL
>Press START
PRO-
PAUSE START
GRAM
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
PCA Module
Programming
3-35