Programming; Prepare Infusion; Select Syringe Type And Size - CareFusion Alaris 8015 User Manual

References throughout this procedure to specific drugs and
drug doses are for illustration purposes only. Refer to specific
drug product labeling for information concerning appropriate
administration techniques and dosages.
See "General Information," "Features and Displays" and the
PC unit section of this User Manual for information about:
• Displays
• Operating Features, Controls, Indicators

Select Syringe Type and Size

At the start of an infusion program, the system prompts the
user to select and confirm the syringe type and size. The
system automatically detects the syringe size, and lists syringe
types and sizes that most closely match the installed syringe.
If the syringe is not recognized, Syringe not recognized is
displayed.
1. Press
CHANNEL SELECT
position.
PCA Module Section
Alaris System User Manual – with v9.33 Model 8015

Prepare Infusion

key. Key must be in
PROGRAM

Programming

WARNING
• Ensure that the displayed
syringe manufacturer and size
correctly identifies the installed
syringe. Mismatches can cause
an under- infusion or
over-infusion to the patient that
could result in serious injury
and/or death. For a list of
compatible syringes, refer to
Compatible Syringes on
page 3-49.
USE
RATE (mL/h)
CHANNEL
SELECT
PAUSE
Programming
3-7