CareFusion Alaris 8015 User Manual page 412

Alarm Message
LOW ETCO2
LOW RR
LOW SATURATION
LOW_PULSE
MAINTENANCE
REMINDER
MAX LIMIT REACHED
MAX MODULES
EXCEEDED
MISSING BATTERY
MULTIDOSE
COMPLETE
A-18
Alarms and Alerts (continued)
Alarms (continued)
Device Priority
EtCO High
2
EtCO High
2
SpO High
2
SpO High
2
PC unit Informational
PCA Low
PC unit Informational
PC unit High
PC unit Medium
Alarms
Meaning
The EtCO value is below the
2
specified limit.
The respiratory rate is below the
specified limit.
The low saturation alarm limits
have been exceeded.
The low pulse rate alarm limit
has been exceeded.
The device is due for
Preventative Maintenance
This alarm occurs when an
attempt is made that exceeds
the maximum allowed drug
amount for the patient. The PCA
dose cannot be delivered until
the configured time passes.
The number of attached
modules exceeds the maximum
allowed.
Missing battery while operating.
The Multidose infusion is
complete.
Alaris System User Manual – with v9.33 Model 8015
Response
Assess the patient's condition. Confirm
that the correct alarm limit values are
selected.
Assess the patient's condition. Confirm
that the correct alarm limit values are
selected.
Assess the patient's condition. Confirm
that the correct alarm limit values are
selected.
Assess the patient's condition. Confirm
that the correct alarm limit values are
selected.
Notify the biomed that Preventative
Maintenance of the device is due
To silence the alarm, press the
SILENCE key. To change the Max
Limit, press CHANNEL SELECT,
press the PROGRAM soft key, and
unlock the door or enter the
Authorization Code applicable for
current Security Access Level.
Removed the unsupported module(s).
Replace the device immediately. The
settings are unrestorable; record
settings before powering down the
device.
Set up a new infusion or press the
CHANNEL OFF key.
Appendix Section