Change Waveform Height - CareFusion Alaris 8015 User Manual

Change Limit Mode (Continued)
2. To change
Limit Mode Setup
OR
To leave
Limit Mode Setup
display, press
ETCO2 Main

Change Waveform Height

1. Press
Waveform height
2. To change
Waveform Height
• mmHg: Displays a waveform for EtCO
60
within 0 60 mmHg range. If EtCO
–
range, Waveform Out of Range; Adjust Scaling
message is displayed until waveform falls back into
range or 0
–
• mmHg: Displays a waveform for full EtCO
99
range, 0 99 mmHg.
–
3. To return to
ETCO2 Main
EtCO Module Section
2
Alaris System User Manual – with v9.33 Model 8015
Channel Options (Continued)
, press applicable soft key.
unchanged and return to
soft key.
EXIT
soft key.
, select applicable range limit.
99 mmHg option is selected.
display, press
values
2
value exceeds that
2
value
2
soft key.
EXIT
A A
Limit Mode Setup
Adult
Neonatal
>Select an Option or
EXIT
EXIT
A
Channel Options
Limit Mode: Adult
Waveform height: 80 mmHg
Waveform time scale: 5 sec
PCA/EtCO2 Trend data
>Select an Option or
EXIT
EXIT
A A
Waveform Height
60 mmHg
99 mmHg
>Select an Option or
EXIT
EXIT
Programming
5-11