Operating Features, Controls, Indicators
IUI Connector, Left
Module Release Latch:
When pressed, allows
module to be removed.
Pump and Syringe Modules Section
Alaris System User Manual – with v9.33 Model 8015
Features and Displays (Continued)
Status Indicators
Alarm
Infusing
(red)
(green)
RATE (mL/h)
Standby
(yellow)
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Door Handle
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
IUI Connector, Right
Rate Display
Channel (module) Message Display
Channel (module) Identification
Channel (module) Select Key: W
pressed, selects corresponding module
for infusion parameter entry and infusion
setup.
Pause Key: W
hen pressed during an
infusion, temporarily stops infusion on that
module. After approximately 2 minutes, a
visual and audio prompt begins.
Channel (module) Off Key: W
pressed and held until a beep is heard,
stops infusion on that module, deselects
that module, and if only that module had
been operating, system powers down.
Repeat for other operating modules to
power off each module.
Restart Key: W
hen pressed, resumes
operation of a previously paused or
alarmed infusion on that module.
hen
hen
General Information
2-143