New Patient (Continued)
2.
To scan barcode on patient identification band, press
scan trigger on handheld scanner.
If scan is successful, an audible tone sounds and patient
ID appears on Main Display.
NOTE:
Patient ID can be entered manually using the PC unit keypad
(see PC unit section of this User Manual).
NOTE:
There is a prompt to accept or decline the change of patient ID if it
is different from the patient ID already associated to the PC unit.
Auto-ID Module Section
Alaris System User Manual – with v9.33 Model 8015
Patient Identification (Continued)
CAUTIONS
•
CLASS 1 LED PRODUCT
stare into the beam or allow beam
to strike patient's face.
• Always verify that information
displayed on the PC unit matches
scanned data.
: Do not
Programming
6-5