CareFusion Alaris 8015 User Manual page 39

Network Status (Continued)
3. To view network status and wireless status information,
press Network Status soft key.
4. Enter password (refer to v9.5 or later System Maintenance
software instructions) and press
• Information based on a wireless status of
DISASSOCIATED
ASSOCIATED
• If wireless status is
information is displayed:
◦ Wireless connectivity:
Authentication, and Encryption types being
used;
BSSID
system is connected to; Speed—transfer rate up to
11 Mbps for 802.11b, 54 Mbps for 802.11a or
802.11b/g and 72 Mbps for 802.11a/b/g/n.
◦ Link Quality—a minimum of 20% recommended
for good wireless connectivity.
◦ Signal Strength—greater than 20% recommended
for good wireless connectivity.
5. To view network connectivity information, press
soft key.
STATUS
• A status of
DISABLED
CONFIGURING
displayed.
• If status is
CONNECTED
◦ PC unit is connected to wireless network.
◦ Profile being used is displayed.
PC Unit Section
Alaris System User Manual – with v9.33 Model 8015
System Options (Continued)
CONFIRM
, ,
CONFIGURING
, or
AUTHENTICATING
, following
ASSOCIATED
, Channel,
SSID
— address of access point that
MAC
,
DISCONNECTED
,
INVALID CONFIG,
:
soft key.
,
DISABLED
,
ASSOCIATING
is displayed.
NET
,
or is
CONNECTED
System Options 3 of 3
Network Status
Wireless Connection
Data Set Status
Maintenance Due Yes
>Select an Option or
EXIT
EXIT
PAGE UP
System Options
Viewing Network Status
is only to be used by
qualified personnel.
* _ _ _ _
>Enter Password or
EXIT
EXIT
CONFIRM
System Options
Wireless Status
Status : ASSOCIATED
AM SWEPXXXXXXXX
SSID :
XXXXXXXXXXXXXXX
BSSID :
00:0A:B3:36:9F:88
Channel : 1 (2.412 Ghz)
Authentication : OPEN
Encryption:
40 bit WEP
Speed: 11 Mbps
Link Quality
35%
75%
Signal Strength
>Press CANCEL to Exit
NET
NET SERVER
STATUS ADDRESS STATUS
General Setup and Operation
1-27