Siemens SCALANCE XC-200 Configuration Manual page 29

Configurable function
Layer VLAN IP interfaces
3
DHCP Relay Agent interfaces
DHCP Relay Agent server
NAT interfaces
Secur‐ Users
ity
IP addresses from RADIUS servers
Simultaneous MAC authentications
(authenticated and blocked) per de‐
vice
4)
Simultaneous MAC authentications
(authenticated and blocked) per port
(configurable)
4)
Management ACLs (access rules for
management)
With the SCALANCE XB-200 and SCALANCE XR-300WG, the number of DHCP pools and manageable IPv4 addresses
1)
depends on the number of ports. The number of ports corresponds to the maximum number of DHCP pools and manageable
IPv4 addresses.
This is an IP interface.
2)
Devices with Y functionality do not support VLANs
3)
If the maximum number of MAC authentications per device is exceeded, all MAC authentications of the port at which the
4)
value was exceeded are reset.
If the maximum number of MAC authentications per port is exceeded, all MAC authentications of the port are reset
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
SCALANCE SCALANCE
XB-200 XR-300WG
1
1
-
(incl. user preset in the factory "admin")
General information
2.2 Configuration limits
Maximum number
SCALANCE SCALANCE
XC-200 XP-200
24
24
4
1
30
4
4000
100
10
SCALANCE
XF-200BA
1
1
-
29