Authorized-Manager; No Authorized-Manager - Siemens SCALANCE XC-200 Configuration Manual

Commands relating to other topics that can be called in the Global configuration mode can be
found in the relevant sections.
You exit the Global configuration mode with the end or exit command and are then in the
Privileged EXEC mode again.
11.3.2.1

authorized-manager

Description
With this command, you enable the authorized manager.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameter assignment:
authorized-manager
Result
The authorized manager is activated.
Further notes
You disable the function with the no authorized-manager command.
11.3.2.2

no authorized-manager

Description
With this command, you disable the authorized manager.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Security and authentication
11.3 Management Access Control List
513