The "Show" Commands; Show Snmp; Show Snmp Community - Siemens SCALANCE XC-200 Configuration Manual

With RMOB events. the SNMP notifications to be called must be configured explicitly, see
section "RMON (Page 576)".
7.5.1

The "show" commands

This section describes commands with which you display various settings.
7.5.1.1

show snmp

Description
This command shows the status information of SNMP.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp
Result
The status information is displayed.
7.5.1.2

show snmp community

Description
This command shows the details of the configured of SNMP communities.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Network protocols
7.5 SNMP
323