Show Snmp Targetaddr; Show Snmp Targetparam - Siemens SCALANCE XC-200 Configuration Manual

Syntax
Call the command without parameters:
show snmp notif
Result
The configured SNMP notification types are displayed.
7.5.1.9

show snmp targetaddr

Description
This command shows the configured SNMP target addresses.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show snmp targetaddr
Result
The configured SNMP target addresses are displayed.
7.5.1.10

show snmp targetparam

Description
This command shows the configured SNMP target parameters.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Network protocols
7.5 SNMP
327