No Smtp-Port - Siemens SCALANCE XC-200 Configuration Manual

Further notes
You can reset the setting to the default with the no smtp-port command.
You display the setting with the show smtp-port command.
7.6.2.7

no smtp-port

Description
With this command, you reset the SMTP port to the default.
The default value is 25.
Requirement
You are in the EVENTS configuration mode.
The command prompt is as follows:
cli(config-events)#
Syntax
Call the command without parameters:
no smtp-port
Result
The SMTP port is reset to the default value.
Further notes
You configure the setting with the smtp-port command.
You display the setting with the show smtp-port command.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Network protocols
7.6 SMTP client
357