No Ports - Siemens SCALANCE XC-200 Configuration Manual

The parameters have the following meaning:
Parameter
interface-type
/a-b,0/c,...
port-channel
a,b,c-d
untagged
all
forbidden
name
vlan-name
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 36)".
Result
The existing VLAN configuration is replaced. To add individual interfaces, you need to recreate
the full list.
Further notes
You display details of the function with the show vlan command.
You reset the settings with the no ports command.
6.1.4.4

no ports

Description
With this command you remove all ports i.e. Member Ports (M), Untagged Member Ports (U)
and Forbidden Ports (F) from a VLAN.
Requirement
You are in the VLAN configuration mode.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
[
forbidden<interface-type><0/a-b,0/c,...>
[<interface-type><0/a-b,0/c,...>]
[portchannel<a,b,c-d>]
]
[name<vlan-name>]
Description
Type or speed of the interface
Port no. of the interface
Keyword for a port channel
Port no. of the interface
Keyword for interfaces or ports that
transfer data packets without VLAN
marking
Specifies that all interfaces or ports are
set to "untagged"
Keyword for forbidden interfaces or
ports
Keyword for the name assignment
Name of the VLAN
Network structures
6.1 VLAN
Range of values / note
Enter a valid interface.
-
Enter a valid interface name
-
-
-
-
max. 32 characters
195