Snmp Agent Version; Snmp Access - Siemens SCALANCE XC-200 Configuration Manual

Result
The SNMP agent function is disabled.
Further notes
You enable the SNMP agent function with the snmpagent command.
7.5.2.3

snmp agent version

Description
With this command, you configure whether all SNMP queries or only SNMPv3 queries are
processed.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
snmp agent version {v3only|all}
The parameters have the following meaning:
Parameter
v3only
all
Result
The setting is configured.
7.5.2.4

snmp access

Description
With this command, you configure the access to an SNMP group.
Requirement
You are in the Global configuration mode.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
Only SNMPv3 queries are processed
All SNMP queries are processed
Network protocols
7.5 SNMP
Range of values / note
-
Default: all
331