Mac-Address-Table Static Unicast - Siemens SCALANCE XC-200 Configuration Manual

The parameters have the following meaning:
Parameter
aa:aa:aa:aa:aa:aa
vlan
vlan-id
For information on names of addresses and interfaces, refer to the section "Addresses and
interface names (Page 36)".
Result
The entry is deleted from the forwarding database.
Further notes
With the show mac-address-table static multicast command, you display the list
of configured entries.
With the mac-address-table static multicast command, you create an entry.
10.2.1.3

mac-address-table static unicast

Description
With this command, you generate a static unicast MAC address entry in the forwarding
database.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
mac-address-table static unicast <aa:aa:aa:aa:aa:aa>
vlan <vlan-id(1-4094)>
interface ([<interface-type> <interface-id>]
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Description
MAC address of the interface
Keyword for the number of a VLAN con‐
nection
Number of the addressed VLAN
[<interface-type> <0/a-b, 0/c,...>]
[port-channel <interface-list>])
Load control
10.2 Static MAC filtering
Range of values / note
-
-
1 ... 4094
463