Show Qos Scheduling Mode; Show Qos-Trust-Mode - Siemens SCALANCE XC-200 Configuration Manual

Load control
10.5 Service classes
Result
The assignment table of DSCP priorities to queues is displayed.
Further notes
You configure the assignment of the DSCP priority to a queue with the dscp-map command.
10.5.1.6

show qos scheduling mode

Description
This command shows the method with which the processing order of the frames is decided.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos scheduling mode
Result
The method with which the frames are processed is displayed.
Further notes
You configure the method for deciding the processing order with the scheduling mode
command.
10.5.1.7

show qos-trust-mode

Description
This command shows port by port the method according to which packets to be forwarded are
prioritized.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
482
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06