Service Classes; The "Show" Commands; Show Qos Agent-Priority; Show Qos Broadcast-Priority - Siemens SCALANCE XC-200 Configuration Manual

10.5

Service classes

This section describes commands for configuring the assignment tables for service classes
and the Differentiated Services Code Point (DSCP).
10.5.1

The "show" commands

This section describes commands with which you display various settings.
10.5.1.1

show qos agent-priority

Description
This command shows the current priority of agent frames.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show qos agent-priority
Result
The current priority of the agent frames is displayed.
Further notes
You configure the priority of agent frames with the agent-priority command.
10.5.1.2

show qos broadcast-priority

Description
This command shows the current priority of broadcast frames.
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Load control
10.5 Service classes
479